Free 8052 Microcontroller Based Projects

FingerPrint Based Security System

2008-04-19T02:52:00.000-07:00

Personal Safes are revolutionary locking storage cases that open with just the touch of your finger. These products are designed as "access denial" secure storage for medications, jewelry, weapons, documents, and other valuable or potentially harmful items.These utilize fingerprint recognition technology to allow access to only those whose fingerprints you choose. It contains all the necessary electronics to allow you to store, delete, and verify fingerprints with just the touch of a button. Stored fingerprints are retained even in the event of complete power failure or battery drain.These eliminates the need for keeping track of keys or remembering a combination password, or PIN. It can only be opened when an authorized user is present, since there are no keys or combinations to be copied or stolen, or locks that can be picked. k
eeping track of keys or remembering a combination password, or PIN. It can only be opened when an authorized user is present, since there are no keys or combinations to be copied or stolen, or locks that can be picked.
For more details visit www.8051projects.info

DS1820 Based High Precision Temperature Indicator

2007-12-10T00:37:00.000-08:00

This project is an High precision digital thermometer which indicates the temperature on the seven segment display. It has an resolution of 0.06deg. The 1 wire temperature sensor IC from Maxim semiconductors is used as the sensor. The DS18S20 Digital Thermometer provides 9–bit centigrade temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18S20 communicates over a 1-wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of –55°C to +125°C. In this project the negative temperatures are not taken so that it will display the temperature from 0deg to 99.9deg.

For more details visit: http://www.8051projects.info/projects.asp

Sending Data From The PC to a Microcontroller

2007-11-19T05:57:00.000-08:00

In this article we are going to learn how to send data to a microcontroller and make the microcontroller respond to the data. For simplicity we are just going to send data to turn on and off an LED which is connected at port P2.0.

So lets start off with designing a communications protocol. From VB we will send an ASCII 255, as a synch byte, and the on/off state (0 or 1). The microcontroller will wait for two (2) bytes of data. After these two bytes of data are received, it will then either switch on/off the LED

Visual Basic at PC side
To get started open Visual Basic.
Start a new Standard EXE.
Next go to the Project | Components... menu
Check the Microsoft Comm control 6.0.
Click OK.
Next double-click on the yellow phone in the toolbar to add the MSComm control to your form.

Now add two option buttons from the tool bar name as "opton" and "optoff", change the caption to ON and OFF for both buttopns.
Now add a command button named cmdsend from the tool bar, and chage the caption to "SEND"

On To The Code
Now that the form is set up and ready to go, we need to start adding our code to the project. The user will select a pin state from option button, and then click cmdSend to send the data to the microcontroller. So first of all we need to set up the MSComm control, and select one of the pin states to start with. So lets add the following code to our form...

Private Sub Form_Load()
On Error Resume Next
'use comm port 1
MSComm1.CommPort = 1
' 9600 baud, no parity, 8 data bits, 1 stop bit
MSComm1.Settings = "9600,N,8,1"

' Disable DTR
MSComm1.DTREnable = False

'open the port
MSComm1.PortOpen = True
End Sub

Now we just need to add the code to send the data. When the user presses cmdSend, we need to do three things.

Get the pin state...
Send the data...

Now lets put it all together and send the data when we press the cmdSend button...

Private Sub cmdsend_Click()
Dim LED As Long

' Get LED State
If opton.Value = True Then
LED = 0
Else
LED = 1
End If

' Send Out Data
MSComm1.Output = Chr$(255) & Chr$(LED)

End Sub
So we sent out the synch byte (255),followed by the LED state.

Finally we need to close the comm port when the VB project unloads so...

Private Sub Form_Unload(Cancel As Integer)
MSComm1.PortOpen = False 'Close the COMM port
End Sub

That's all at the PC side

Microcontroller Side
Program the MIcrocontroller with the following code

ORG 00H ; Reset
MOV TMOD,#20H ;enable timer1, mode 2 (auto reload)
MOV TH1,#0FDH ;9600 Baud rate
MOV SCON,#50H ;8 bit, 1 stop bit, REN enabled
SETB TR1

HERE:JNB RI,HERE ;wait for character to come in
MOV A,SBUF ;get data in A
CJNE A,#0FFH,DOWN ;chk if the char is synch byte ie.offh or 255
;if not jump to clear RI
CLR RI ;get ready to get next byte
WAIT:JNB RI,WAIT ;wait for character to come in
MOV A,SBUF ;get data in A
CJNE A,#00H,NXT ;chk if the char is 0
CLR P2.0 ;switch on LED
SJMP DOWN ;jump to clear RI
NXT:CJNE A,#01H,DOWN ;chk if the char is 1
SETB P2.0 ;switch off LED
DOWN:CLR RI ;get ready to get next byte
SJMP HERE ;keep getting the data
Now run the VB project, select either ON or OFF, and press send. You should see the LED turn ON when you send a ON command, and turn OFF when you send a OFF command.

Visit http://www.8051projects.info for more details

.

Digital IC Tester for 74 series using 89C55 Microcontroller

2007-10-31T21:03:00.000-07:00

The chip tester verifies the functionality and timing of a variety of 7400 series integrated circuits. Students taking Digital Logic Design Lab, Use these chips often in their laboratory. The IC to be tested should be placed on the ZIF socket and the Microcontroller prompts the user to enter the IC number of the chip to be tested. After entering it the microcontroller will check the IC as per the truth table of the IC which is stored in its ROM. It will check each aand every pin of the IC and produce the Output detaily. Like "Gate 1 is good", "Gate is Bad", "Counter 1 is Good" etcThe Block diagram of the project is given below for referenceFor IC's list that can be tested by this project Click here

For more details Visit: http://www.8051projects.info/proj.asp?ID=73

Voice Ineractive System For College Automation (AT89C2051 + VB)

2007-09-24T03:42:00.000-07:00

Now-a-days every institution needs automation. As a part of college automation, we have decided to do a project “Voice Interactive System for College Automation”. Our project allows the user to know the student’s attendance and marks quickly through the telephone line without the intention of the college authority. In the hardware side embedded system has been used. A 20 pin microcontroller 89C2051 is used because of its compatibility with our hardware. This microcontroller controls the whole hardware. Telephone line is used for communication purpose. Visual Basic has been used for software programming. Presentation in the class and outcome of the university are made reachable to the parents by our project. It will be very obliging to the parents to be acquainted with their son’s/daughter’s recital in the college.

Free 8051 / 8052 Microcontroller Projects

2007-09-11T03:25:00.000-07:00

1. Auto Control of three phase Induction motor (AT89S52)
2. Automatic College Bell (AT89S8252 & DS1307)
3. Automatic plant Irrigation (AT89C2051)
4. Automatic Room light Controller with Visitor Counter (AT89S52)
5. BIOMEDICAL MONITORING SYSTEM (AT89C2051 + TX/RX)
6. Device Controlling through PC (Visual Basic)
7. Digital Calendar (AT89C2051)
8. Digital Countdown Timer (AT89C2051)
9. Digital Visitor Counter (AT89C2051)
10. DS1620 Based Temperature Controller (AT89S52)
11. Electronic Voting Machine (AT89S8252)
12. Electronics Components Tester (AT89C52)
13. Fire Fighting Robot (AT89S52)
14. Gates Emulator (AT89C2051)
15. Home Security System(AT89S52)
16. Infrared Interruption counter (AT89C2051)
17. InfraRed Remote Switch (6 devices + 1 fan) -AT89S52
18. InfraRed Remote Switch (AT89C2051)
19. IVRS For College Automation (AT89C2051 + VB)
20. Line Following Robot (AT89C2051)
21. Microcontroller Based Caller ID (AT89C2051)
22. Microcontroller Based Digital code Lock (AT89C2051)
23. Multipattern Running Lights (AT89C2051)
24. Parallel Telephone with auto secrecy (AT89C2051)
25. Password Based Door Locking (AT89C2051)
26. PC BASED DATA LOGGER (AT89S52 + VB)
27. PC Based GPS28. PC Based Robot (AT89C2051)
29. PC -MC communication (AT89C2051 + Tx/Rx)
30. Prepaid Energy Meter (AT89S52)
31. REMOTE CONTROL VIA INTERNET (AT89S52 + Ethernet Adaptor)
32. Remote Controlled Digital Clock with DS1307 & AT89C2051
33. RF Based Remote control (AT89C2051)
34. RFID Based Attendance System (AT89S52 + RFID)
35. RFID Based Security System (AT89S52 + RFID)
36. SECURED WIRELESS DATA COMMUNICATION (AT89S52)
37. SMS based Device Switching (ATmega8515 + Nokia 5110 Mobile)
38. SMS through Telephone (AT89S8252)
39. Solar tracking System (AT89C52)
40. Telephone controlled Remote switch (AT89C2051)
41. Temperature controlled Fan (AT89S52)
42. TIME OPERATED ELECTRICAL APPLIANCE CONTROLLING SYSTEM
43. Traffic Light Controller (AT89C2051)
44. Two Line Intercom (AT89C2051)
45. Voice Ineractive System For College Automation (AT89C2051 + VB)

Digital Calendar (AT89C2051)

2007-09-11T03:21:00.001-07:00

This Project Digital Calendar using Microcontroller is an advanced digital calendar, which displays the Date, Day, Month over the LED display. It has an 8 bit Microcontroller which runs on the Program embedded on its ROM. Separate LED’s are provided for the date, day, and month. The system has an battery backup so that it can run over all the time even during the power failure. Totally there are 31 LED’s for indicating the date and 12 LED’s for indicating the Month and 7 LED’s to indicate the day. All the above systems are controlled by the Microcontroller. In our project we are using the popular 8 bit microcontroller AT89C2051. It is a 20 pin microcontroller.

http://www.8051projects.info/proj.asp?ID=66

BIOMEDICAL MONITORING SYSTEM (AT89C2051 + TX/RX)

2007-09-11T03:18:00.000-07:00

In spite of the improvement of communication link and despite all progress in advanced communication technologies, there are still very few functioning commercial wireless monitoring systems, which are most off-line, and there are still a number of issues to deal with. Therefore, there is a strong need for investigating the possibility of design and implementation of an interactive real-time wireless communication system. In our project, a generic real-time wireless communication system was designed and developed for short and long term remote patient-monitoring applying wireless protocol. The primary function of this system is to monitor the temperature and Heart Beat of the Patient and the Data collected by the sensors are sent to the Microcontroller. The Microcontroller transmits the data over the air. At the receiving end a receiver is used to receive the data and it is decoded and fed to Microcontroller, which is then displayed over the LCD display. If there is a dangerous change in patient's status an alarm is also sounded.

http://www.8051projects.info/proj.asp?ID=48

Automatic Room light Controller with Visitor Counter (AT89S52)

2007-09-11T03:12:00.000-07:00

This Project “Automatic Room Light Controller with Visitor Counter using Microcontroller” is a reliable circuit that takes over the task of controlling the room lights as well us counting number of persons/ visitors in the room very accurately. When somebody enters into the room then the counter is incremented by one and the light in the room will be switched ON and when any one leaves the room then the counter is decremented by one. The light will be only switched OFF until all the persons in the room go out. The total number of persons inside the room is also displayed on the seven segment displays. The microcontroller does the above job. It receives the signals from the sensors, and this signal is operated under the control of software which is stored in ROM. Microcontroller AT89S52 continuously monitor the Infrared Receivers, When any object pass through the IR Receiver's then the IR Rays falling on the receiver’s are obstructed , this obstruction is sensed by the Microcontroller

http://www.8051projects.info/proj.asp?ID=39

Auto Control of three phase Induction motor (AT89S52)

2007-09-11T02:48:00.000-07:00

This Project can be used with the three phase Induction motors. The circuit will take the full control of the motor and it will protect the motor from several faults such us over voltage and under voltage and the circuit will switch on the motor under safety conditions. The circuit was fully controlled by the microcontroller and the microcontroller will continuously monitors the voltages of the three phase and if the voltage goes abnormal then it will switch off the motor until they are normal. All the conditions are displayed it over the LCD display. In our project we are using the popular 8 bit microcontroller AT89S52. It is a 40 pin microcontroller.

http://www.8051projects.info/projects.asp